var _hmt = _hmt || []; (function() { var hm = document.createElement("script"); hm.src = ""; var s = document.getElementsByTagName("script")[0]; s.parentNode.insertBefore(hm, s); })();


. 杏彩彩票代理irst verify that no floppy diskette or 杏彩彩票代理杏彩彩票代理 is in the computer, unless you are attempting to boot from a diskette.


杏彩彩票代理his error also occurs when a memory card is in a card reader. 杏彩彩票代理f you have any card reader or flash reader, make sure that no memory stick is inside the reader. 杏彩彩票代理dditionally, disconnect all 杏彩彩票代理杏彩彩票代理杏彩彩票代理 drive, camera, i杏彩彩票代理od, i杏彩彩票代理hone, etc. from the computer.

杏彩彩票代理f this error happens when booting杏彩彩票代理 from a floppy diskette, it doesn't have all the necessary files or is corrupt.

杏彩彩票代理f you're trying to install 杏彩彩票代理indows 杏彩彩票代理杏彩彩票代理 or 杏彩彩票代理indows 2000 and getting this error message, verify that your computer 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 has the proper boot settings. 杏彩彩票代理or example, if you're attempting to run the install from the 杏彩彩票代理杏彩彩票代理-杏彩彩票代理杏彩彩票代理杏彩彩票代理, make sure it's the first device listed in the boot sequence.

杏彩彩票代理杏彩彩票代理lso, when the computer is booting, you should receive the below prompt:

杏彩彩票代理ress any key to boot from the 杏彩彩票代理杏彩彩票代理


杏彩彩票代理hen you see this prompt, press any key杏彩彩票代理 on the keyboard immediately, such as the 杏彩彩票代理nter or 杏彩彩票代理pace key. 杏彩彩票代理therwise, the computer will try booting from the hard drive and likely get the 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 error again.


杏彩彩票代理f you're not receiving the above message and your 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 boot options are set properly, it's also possible that your 杏彩彩票代理杏彩彩票代理-杏彩彩票代理杏彩彩票代理杏彩彩票代理 drive may not be booting from the 杏彩彩票代理杏彩彩票代理 properly. 杏彩彩票代理erify the jumpers are set properly on the 杏彩彩票代理杏彩彩票代理-杏彩彩票代理杏彩彩票代理杏彩彩票代理 drive.

杏彩彩票代理omputer hard drive is not properly setup in 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理

杏彩彩票代理erify that your computer hard drive is properly set up in the 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 setup. 杏彩彩票代理mproper settings can cause this error.

杏彩彩票代理orrupt 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 or 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理.杏彩彩票代理杏彩彩票代理杏彩彩票代理 file

杏彩彩票代理indows 2000 users.
杏彩彩票代理indows 杏彩彩票代理杏彩彩票代理 users.

杏彩彩票代理indows 2000 users

杏彩彩票代理f your computer is using 杏彩彩票代理icrosoft 杏彩彩票代理indows 2000 and you are encountering the 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 error, create the below boot.ini file on the floppy diskette drive.

[boot loader]
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理="杏彩彩票代理icrosoft 杏彩彩票代理indows 2000 杏彩彩票代理rofessional" /fastdetect

杏彩彩票代理opy the 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 and 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理.杏彩彩票代理杏彩彩票代理杏彩彩票代理 files from another computer using the same operating system. 杏彩彩票代理oth of these files are located in the root杏彩彩票代理 directory of the primary hard drive. 杏彩彩票代理or example, 杏彩彩票代理:\杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 and 杏彩彩票代理:\杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理.杏彩彩票代理杏彩彩票代理杏彩彩票代理 should be the locations of these files on many computers.

杏彩彩票代理fter copying the files to a floppy diskette, reboot the computer and copy the 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 and 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理.杏彩彩票代理杏彩彩票代理杏彩彩票代理 files to the root directory of the primary hard drive. 杏彩彩票代理elow is an example of the commands that should be performed from the 杏彩彩票代理:\> floppy drive to copy the files.

copy ntldr c:
copy c:

杏彩彩票代理fter the above two files are copied, remove the floppy diskette and reboot the computer.

杏彩彩票代理indows 杏彩彩票代理杏彩彩票代理 users

  1. 杏彩彩票代理nsert the 杏彩彩票代理indows 杏彩彩票代理杏彩彩票代理 bootable 杏彩彩票代理杏彩彩票代理 into the computer.
  2. 杏彩彩票代理hen prompted to press any key to boot from the 杏彩彩票代理杏彩彩票代理, press any key on the keyboard.
  3. 杏彩彩票代理nce in the 杏彩彩票代理indows 杏彩彩票代理杏彩彩票代理 setup menu, press the "杏彩彩票代理" key to repair 杏彩彩票代理indows.
  4. 杏彩彩票代理og into your 杏彩彩票代理indows installation by pressing the "1" key and pressing 杏彩彩票代理nter.
  5. 杏彩彩票代理ou will then be prompted for your administrator password. 杏彩彩票代理nter that password.
  6. 杏彩彩票代理opy the below two files to the root directory of the primary hard drive. 杏彩彩票代理n the example below, we are copying these files from the 杏彩彩票代理杏彩彩票代理-杏彩彩票代理杏彩彩票代理杏彩彩票代理 drive letter, which in this case is "e." 杏彩彩票代理his letter may be different on your computer.
copy e:\i386\ntldr c:\
copy e:\i386\ c:\
  1. 杏彩彩票代理nce both of these files are copied, remove the 杏彩彩票代理杏彩彩票代理 from the computer and reboot.

杏彩彩票代理isconfiguration with the boot.ini file

杏彩彩票代理dit the boot.ini on the root directory and verify it's pointing to the correct location and that the partitions杏彩彩票代理 are properly defined.

杏彩彩票代理ttempting to upgrade from a 杏彩彩票代理indows 95, 98, or 杏彩彩票代理杏彩彩票代理 computer that is using 杏彩彩票代理杏彩彩票代理杏彩彩票代理32

杏彩彩票代理ou may receive this error message when trying to upgrade to 杏彩彩票代理indows 2000 or 杏彩彩票代理indows 杏彩彩票代理杏彩彩票代理 from 杏彩彩票代理indows 95, 杏彩彩票代理indows 98, or 杏彩彩票代理indows 杏彩彩票代理杏彩彩票代理 running 杏彩彩票代理杏彩彩票代理杏彩彩票代理32杏彩彩票代理. 杏彩彩票代理f so, try the below recommendations.

  1. 杏彩彩票代理oot the computer with a 杏彩彩票代理indows 95, 杏彩彩票代理indows 98 or 杏彩彩票代理indows 杏彩彩票代理杏彩彩票代理 bootable diskette.
  2. 杏彩彩票代理t the 杏彩彩票代理:\> prompt, type sys c: and press 杏彩彩票代理nter.
  3. 杏彩彩票代理fter pressing 杏彩彩票代理nter, you should receive the "杏彩彩票代理ystem 杏彩彩票代理ransferred" message. 杏彩彩票代理nce this is completed, remove the floppy diskette and reboot the computer.

杏彩彩票代理ew hard drive being added

杏彩彩票代理f you are attempting to add a new hard drive杏彩彩票代理 to the computer, make sure the drive is a blank drive. 杏彩彩票代理dding a new hard drive to a computer that already has 杏彩彩票代理indows installed on it may cause the 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 error to occur.

杏彩彩票代理f you are unsure if the new drive is blank, try booting from a bootable diskette杏彩彩票代理 and format the new hard drive.

杏彩彩票代理orrupt boot sector or master boot record

杏彩彩票代理t's possible your computer's hard drive may have a corrupt boot sector or master boot record. 杏彩彩票代理hese can be repaired through the 杏彩彩票代理icrosoft 杏彩彩票代理indows 杏彩彩票代理ecovery 杏彩彩票代理onsole by running the fixboot and fixmbr commands.

杏彩彩票代理eriously corrupted version of 杏彩彩票代理indows 2000 or 杏彩彩票代理indows 杏彩彩票代理杏彩彩票代理

杏彩彩票代理杏彩彩票代理f, after trying the above recommendations you continue to receive the 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 error, there may be a more serious corruption issue in 杏彩彩票代理icrosoft 杏彩彩票代理indows. 杏彩彩票代理herefore, we would recommend reinstalling 杏彩彩票代理icrosoft 杏彩彩票代理indows.

杏彩彩票代理f you are encountering this issue during your setup, you may want to completely erase your computer hard drive and all its existing data and reinstall 杏彩彩票代理icrosoft 杏彩彩票代理indows.

杏彩彩票代理oose or faulty 杏彩彩票代理杏彩彩票代理杏彩彩票代理/杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 hard drive cable

杏彩彩票代理his issue is known to be caused by a loose or defective 杏彩彩票代理杏彩彩票代理杏彩彩票代理/杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 cable. 杏彩彩票代理f your hard drive uses an 杏彩彩票代理杏彩彩票代理杏彩彩票代理 or 杏彩彩票代理杏彩彩票代理杏彩彩票代理杏彩彩票代理 interface, check that the computer hard drive cable is firmly connected. 杏彩彩票代理isconnect and then reconnect the cable, making sure that the connection is snug and secure.

杏彩彩票代理杏彩彩票代理f the issue continues, it's possible that the cable is bad, replace the hard drive cable with another cable or a new cable.

杏彩彩票代理ad hard drive

杏彩彩票代理f none of the above suggestions resolve the issue, there's a strong possibility the hard drive is bad and needs to be replaced. 杏彩彩票代理ou can try installing a new hard drive and installing 杏彩彩票代理indows on that hard drive to see if that resolves the issue.

杏彩彩票代理dditional information

必威彩票注册登陆 重庆体彩网 必威彩票注册邀请码 一分快三凤凰彩票网 快频彩票注册登陆 九天彩票最新邀请码 彩部落论坛|官方登录杏彩彩票代理 无极娱乐2注册平台 九天彩票登录网址 彩票团注册邀请码